The Nalift vna forklift proportional valve and the installation precautions.

The solenoid valve of the forklift is mainly installed on the gear box of the forklift such as Nalift articulated forklift. The solenoid valve has a closed cavity. There are through holes and slots at different positions. Each hole leads to a different control hole. The middle of the cavity is a valve, and the outer circle is electromagnetic. Iron, magnet coil energized valve body will be attracted by the front and rear to work, by controlling the movement of the valve body to block or leak different oil drain holes, generally divided into two types: normally open and normally closed, hydraulic oil will enter different oil drain pipes, then push the piston of the oil cylinder by the pressure of the oil, and the piston drives the piston rod, and the piston rod drives the mechanical device to move. This controls the forward, reverse and neutral stop of the forklift by controlling the current of the electromagnet.

5. After the Nalift narrow aisle forklift solenoid valve is installed, it needs to be energized several times to test, so that it can be put into use without oil leakage.